AIM Sports LLC XA3MXSST12A010 - AiM Sports MXS 1.2 Strada Data Loggers

MXS 1.2 Strada-The compact TFT dash for road use

A wide range of data sources:

MXS 1.2 Strada, the evolution of MXS Strada, is a 5" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS09 Module.

CAN output:

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Watch your data in pre-configured pages:

MXS 1.2 Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more... You can choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the pushbuttons.

High contrast TFT display:

MXS 1.2 Strada features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels. The dash is of course available also in the "Street Icons" version (fuel, oil, water temp., etc.)

Flexible alarms:

The ten multicolored RGB shift lights can be customized as you like, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colors: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.

Digital output:

MXS 1.2 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

Camera inputs, also for mirror camera:

Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

AiM Sports MXS 1.2 Strada Data Loggers

AiM Sports MXS 1.2 data loggers are built on the evolution of the MXS Strada. Each MXS 1.2 data logger is built for road use using a 5 in. color display with analog/digital inputs and math channels. The CAN output allows you to send messages directly to an existing CAN network in order to improve the range of the vehicle control possibilities. On the high-contrast light sensor brightness display, you can watch a wide range of parameters—such as speed, water temperature, oil pressure, lap times, RPM, fuel pressure, intake temperature and much more.

You can choose any custom pages you wish from among a wide library of page styles, defining which data you want to see. Another state-of-the-art feature is the built-in shift lights that can be customized by color and when you want them to flash. This data logger also has two analog camera inputs to swap your display into a mirror camera. All features are easy to set and operated by simple push-buttons on the data logger unit. Order the model preferred for your needs.